3FT SEG Fabric Stand

A silicone edge graphic (SEG) is a dye-sub fabric print with a thin silicone strip sewn around the perimeter that presses into a groove in the aluminum extrusion. You start at one corner and push the bead in by hand all the way around — no tools, and the fabric pulls drum-tight with a frameless, edge-to-edge look. Swapping graphics takes a couple of minutes, which is why SEG frames are the standard for booths that change messaging between shows.

The visible graphic area is roughly 3 ft wide by about 7.5 ft tall on a floor-standing frame, which fits a 10x10 booth back wall in pairs or works alone beside a counter. Build your artwork at full size at 100 to 150 DPI and add a 1-inch bleed on all four sides for the silicone strip, then keep logos and body copy at least 2 inches inside the trim. Anything closer to the edge risks getting rolled into the groove when the graphic is seated.

A 3ft banner stand with a retractable vinyl graphic is cheaper and faster to pop up, but the vinyl curls at the edges, catches glare and shows every ding after a few shows. An SEG fabric display gives a flat, matte, wrinkle-resistant surface that photographs cleanly under booth lighting and lets you reprint just the fabric later. If the display travels to more than two or three events a year, the SEG frame usually costs less over its life.

The frame breaks down into aluminum sections with push-button connectors and packs with the folded graphic into a padded carry bag, usually around 20 to 25 lbs total — checkable as luggage. Fold the fabric loosely rather than creasing it in the same spot every trip, and steam out any lines before the doors open. We can also print a second graphic on the same frame so you can carry two messages in one bag.

Use the file types listed beside the artwork upload. Supply a print-ready file at the correct size with the bleed and safe area required for your product. Artwork uploaded directly is attached as supplied; the Design Studio has a separate layout and export step. Attaching a file does not confirm that its colors, fonts or cut lines have passed production checks.

Yes — Angels Print offers nationwide shipping, with a shop in Sun Valley, California. Delivery options depend on the selected item and order. Pickup at our Sun Valley shop is always free. Delivery costs at least $50; higher calculated charges apply. Legacy delivery thresholds and promotion codes do not change that charge. We calculate the available delivery charge at checkout from your ZIP and the items in the order. Oversized items and freight may require a separate delivery quote — call (818) 806-9006 or request a quote at angelsprint.com/contact. The $50 minimum is not a fixed freight quote.