Standard Banner Sizes: Dimensions That Fit Your Space

Standard banner sizes available from Angels Print include 24 × 48, 24 × 72, 36 × 48 and 36 × 72 inches for blockout vinyl banners, plus 33 × 81 inches for the two retractable displays featured here. Choose by the space you have and how the banner will be supported; the listed graphic dimensions alone don't tell you the floor space a stand needs.

Measure before you build the artwork. Record the available width and height, then note anything that will cover the graphic. A table can hide the lower portion of a retractable banner, while a hanging banner needs attachment points that suit its finishing options.

Which standard banner sizes can you compare?

Use this banner size chart as a starting point. The vinyl measurements below follow the catalogue's width-by-height fields. If you want a horizontal layout, confirm the intended orientation and finishing positions before ordering.

24 × 48 inches: 2 × 4 feet. This blockout vinyl option has a narrow rectangular proportion. Compare it with your mounting area before deciding how much copy to include.

24 × 72 inches: 2 × 6 feet. The width stays at 24 inches while the height increases. A layout made for 24 × 48 inches needs adjustment to use this taller proportion without stretching the design.

36 × 48 inches: 3 × 4 feet. This option adds width compared with 24 × 48 inches. It gives a differently shaped layout more room without increasing the listed height.

36 × 72 inches: 3 × 6 feet. This is the widest and tallest preset among the blockout vinyl sizes listed here. Check the full mounting space, including where the attachment points will sit.

33 × 81 inches: retractable displays. Both featured retractable products list this size. It equals 2 feet 9 inches by 6 feet 9 inches, but those dimensions don't establish the assembled stand's depth or exact exposed graphic area.

The backdrop catalogue also lists “120 x 96” and “96 x 96.” Its unit setting conflicts with those labels, so confirm the finished dimensions and units with Angels Print before using either selection to plan your space or artwork.

Which vinyl banner dimensions fit your mounting area?

The Blockout Vinyl Banner offers those four presets plus Custom Size. Its custom-size fields list widths from 12 to 96 inches and heights from 12 to 480 inches. The configurator confirms the available combination.

Start with the opening you need to fill. A banner that matches a wall's dimensions exactly may leave no room for the attachment arrangement you intend to use. Decide where it will attach before choosing the finished size.

This product uses 18oz. Blockout Banner material and offers Front Only or Front and Back printing. Choose the second face only if people can see it. A banner against a solid wall gets no viewing benefit from a printed reverse.

Finishing affects that decision. Four-side hemming is listed for Front Only printing; don't assume the same selection applies to Front and Back. Pole-pocket choices include Top & Bottom, Left & Right and single-edge options. Grommet choices include 4 Corners, Every 2 Feet and Custom, with No also available.

Check those choices together. A pole pocket needs to suit the supporting pole, and the supplied options don't specify its finished opening. Ask for that measurement before committing to existing hardware.

What retractable banner stand sizes are listed?

The Black Stand Retractable Banner lists a 33 × 81-inch graphic with a Standard Stand identified as 33 inches wide. Printing is Front Only, the stand color is Black, and the material choices are Smooth Vinyl Banner or Fabric.

The Double Sided Retractable Banner also lists 33 × 81 inches, with a Deluxe Stand identified as 33 inches wide and double sided. It offers Front and Back printing with Smooth Vinyl Banner or Fabric.

The size comparison is straightforward. The viewing decision takes more thought: use a single face where everyone approaches from one direction, and consider two faces where both sides will remain visible. Confirm the assembled footprint separately so the base fits the placement.

Don't use the stand's width as an artwork template. Ask about the exposed graphic area and any required allowances before placing contact details near the bottom. For a broader hardware comparison, read Retractable Banner vs Tension Fabric Display.

How should you choose a backdrop banner size?

For the Backdrop Banner, settle the size-label ambiguity first. Ask Angels Print to confirm the finished width and height associated with “120 x 96” or “96 x 96,” including the units. Don't convert those labels into feet on assumption.

Then measure the scene. For photographs, the banner needs to cover the background visible around the subjects from the intended camera position. Mark the proposed edges in the room and check that framing before preparing a layout.

Material choices are Fabric (Premium) and 13oz. Matte Vinyl (Economy). The Stand selection offers No or Telescopic Stand; confirm the hardware choice explicitly. The catalogue also lists Top & Bottom pole pockets and 4 Corners grommets, with the configurator confirming the available combination.

What do the starting prices and quantities mean?

Compare configurations, not just the first price displayed. Banner dimensions, material and printed sides can affect the order, while hardware and finishing selections may change what you're buying. Checkout gives the final price for the selected configuration.

Black Stand Retractable Banner: from $1135.46 for the default run of 5 pieces, with a listed per-piece price of $227.09.

Backdrop Banner: from $1139.94 for the default run of 3 pieces, with a listed per-piece price of $379.98.

Blockout Vinyl Banner: from $1096.70 for the default run of 11 pieces, with a listed per-piece price of $99.70.

Double Sided Retractable Banner: from $1128.38 for the default run of 2 pieces, with a listed per-piece price of $564.19.

These are default-run starting prices, not quotes for every size. The blockout product's supplied quantity menu lists 1 through 10 despite its 11-piece default run, so confirm the quantity you need in the configurator before relying on that starting configuration.

What should you check before uploading artwork?

Build for the selected dimensions. Changing a 24 × 48-inch layout to 24 × 72 inches changes its proportions; stretching the file would distort the artwork. Rearrange the content to fit instead.

Follow the file types, bleed and safe-area requirements shown beside the selected product's artwork upload. A print-ready PDF can be useful, but no universal bleed measurement is supplied here. Ask about missing requirements before preparing the final file.

Check image resolution at final print size. Keep key information clear of finishing areas according to the confirmed requirements. Uploading a file or viewing a preview doesn't confirm that it's ready for production.

A digital proof is available on request. Manufacturing starts immediately after payment, so resolve size questions and discuss any proof request before paying. Don't assume a proof request automatically holds the order.

Order through Banner Printing, call Angels Print at (818) 806-9006 to confirm dimensions, or visit 8511 Lankershim Blvd, Sun Valley, CA 91352. Bring your available width and height so we can discuss the configuration that fits. Pickup is always free.