Stickers & Labels templates
Stickers are the widest size range in the catalogue and the least forgiving of thin outlines: a contour cut wanders by up to a sixteenth of an inch, so a hairline border around the artwork will look uneven on some pieces. These layouts either bleed the design past the cut or hold a deliberate white margin. Clear vinyl gets a White underbase — without it, everything you print goes transparent.
Picked for a trade
Same library, narrowed to one kind of business, with the copy, the quantities and the stock advice that trade actually needs.
100 starting layouts, drawn for 2 × 2"
Each one opens in the studio as editable layers. The wording is a placeholder — replace it with yours and the layout holds.
Showing 100 of 100 designs in this product
Sizes we print
19 sizes in 12 proportions — a layout survives a change of size, not a change of proportion, which is why the grid above is drawn for the size marked below.
1 : 1 square
- 2 × 2"templates drawn here
- 1 × 1"
- 3 × 3"
- 4 × 4"
2 : 1 landscape
- 2 × 1"
- 4 × 2"
- 6 × 3"
- 8 × 4"
1.5 : 1 landscape
- 3 × 2"
- 6 × 4"
1 : 1.75 portrait
- 4 × 7"
1 : 1.61 portrait
- 4 × 6.5"
1 : 1.59 portrait
- 5 × 8"
1 : 1.41 portrait
- 5 × 7"
1 : 1.3 portrait
- 8.5 × 11"
1.33 : 1 landscape
- 4 × 3"
1.55 : 1 landscape
- 8.5 × 5.5"
2.43 : 1 landscape
- 8.5 × 3.5"
3 : 1 landscape
- 6 × 2"
How this file has to be built
- Bleed 0.125" · safety 0.125"
- Backgrounds run 0.125" past the cut line so trimming never opens a white sliver; anything that must survive stays 0.125" inside it. The studio canvas is the cut line itself — magenta edge — and the dashed guide inside it is the safety margin.
- 300 DPI at final size
- Small format is read at arm's length, so photos and logos need the full 300. Printed on one side.
- White underbase layer · Foil mask · Raised spot UV mask
- These ride as separate masks, not as part of the artwork: 100% black where the layer lands, white where it does not. Design the ink in the studio and send the mask alongside it.
- · Clear matte and clear gloss vinyl need a White layer under every element that must stay opaque.
- · Contour cut tolerance is about 1/16 in — avoid thin even borders that expose the drift.
- · Sheet sizes (8.5 × 11, 8.5 × 5.5, 8.5 × 3.5) are the sheet, not the individual sticker.
What it costs printed
Prices are the catalogue entry point for each item, computed by the same engine that charges at checkout. Stock, finish, size and quantity move the number — the configurator on each page shows it live.
Stickers & Labels questions
- What is the difference between die-cut and kiss-cut?
- Die-cut goes through sticker and backing, so each piece is a separate shape. Kiss-cut cuts only the vinyl and leaves the backing intact, which gives you a square card with a peelable shape on it — easier to hand out and to mail.
- Why does my design on clear vinyl look washed out?
- Because CMYK ink is translucent. Anything printed on clear needs a White layer underneath to be opaque. Order clear vinyl with white ink and supply the white shape as a separate 100% K mask.
- Do sheet sizes mean the sticker or the sheet?
- The sheet. 8.5 × 11 is a full letter-size sheet that can hold dozens of kiss-cut shapes; the individual sticker size is whatever you lay out on it.
✦ Let's make something physical
Your brand, printed to perfection.
From a single business card to a building wrap — get an instant start or a custom quote today.